TY - JOUR TI - Accounting for power take-off efficiency in optimal velocity tracking control of wave energy converters AU - Stock, A T2 - Ocean Engineering AB - There has been much research into how Wave Energy Converters (WECs) can capture energy from the waves and convert it into kinetic energy in the mechanical system (mechanical energy). However, because WECs typically generate power at high force and with low speed, the conversion of the mechanical energy into electrical energy can be inefficient. If Power Take-Off (PTO) efficiency is not accounted for in controller design then the efficiency of the WEC from wave energy to electrical energy can be poor. In this work, an adaptation of Optimal Velocity Tracking (OVT) control is presented, termed OVT-E, that accounts for PTO efficiencies in the controller formulation such that it converts more energy from the waves to electricity than traditional OVT approaches, termed OVT-M. Results show that, for an example WEC and PTO system in a simulation environment, OVT-E produces more efficient electrical energy conversion than OVT-M with lower forces through the drive-train. OVT-E is also shown to convert more electrical energy than an adaptive linear damping method. The methodology for designing OVT-E could have further applications when coupled with other controller implementations or if used alongside machine-learning for control co-design purposes. DA - 2024/11// PY - 2024 PB - Elsevier VL - 312 IS - Part 2 SP - 119191 UR - https://www.sciencedirect.com/science/article/pii/S0029801824025290 DO - 10.1016/j.oceaneng.2024.119191 LA - English KW - Wave KW - Point Absorber KW - Modeling KW - Power Take Off ER -