TY - JOUR
TI - Analysis of failure modes for a non-crimp basalt fiber reinforced epoxy composite under flexural and interlaminar shear loading
AU - Chowdhury, I
AU - Nash, N
AU - Portela, A
AU - O'Dowd, N
AU - Comer, A
T2 - Composite Structures
AB - This study investigates the mechanical properties (interlaminar shear and flexural strength) and failure modes of a basalt/epoxy composite, manufactured using a non-crimp-fabric (NCF) with a vacuum assisted resin infusion process. Under flexural bending, damage initiated on the compression side between 20 and 50% of peak load and progressed from ply to ply with increasing load. Failure at the tension surface of the flexural bending specimen was confined to the bottom ply and was evident only close to final failure. Fiber kinking was the dominant failure mechanism on the compression side whereas fiber breakage was the dominant mechanism on the tension side. Regarding interlaminar shear, interlaminar shear cracks initiated once samples were subjected to stress levels above 50% of peak stress and grew until failure with the crack following the fibre matrix interface of 90° tows. Overall, comparing with values available in the open literature, the NCF basalt/epoxy composite outperformed plain-woven basalt/epoxy and plain-woven E-glass/epoxy composites in terms of both flexural and interlaminar shear strength but demonstrated lower strength than NCF E-glass/epoxy composite.
DA - 2020/08//
PY - 2020
PB - Composite Structures
VL - 245
SP - 112317
UR - https://www.sciencedirect.com/science/article/pii/S0263822319345064
DO - 10.1016/j.compstruct.2020.112317
LA - English
KW - Current
KW - Tidal
KW - Materials
KW - Survivability
ER -