Maintenance

Work done on a device after it is operational.

Maintenance activities, or work done on a device after it is operational, may involve cleaning the surface of a device, replacing device components, or refilling hydraulic fluids. Such work can typically be conducted by divers, underwater robots, or by temporarily removing the device from the water. However, device deployment in highly energetic offshore environments can make regular maintenance costly and challenging. Nevertheless, continued maintenance of marine renewable energy devices is especially important as varying operating speeds and loads, corrosion, and other structural stresses represent significant threats to device survivability and performance.

Photo: BALAO-SABELLA

Total results: 73
Title Author Date Type of Content Technology Collection Method Device
Flume experiments on the impact of a cross-flow turbine on an erodible bed Ebrahimi, M., Duncan, S., Belmont, M. Journal Article Current, Cross Flow Lab Data
DTOceanPlus Deliverable D6.3: Reliability, Availability, Maintainability and Survivability Assessment Tool – Alpha version Yang, Y., Nambiar, A., Luxcey, N. Report Performance
Structural health monitoring of grouted connections for offshore wind turbines by means of acoustic emission: An experimental study Tziavos, N., Hemida, H, Dirar, S. Journal Article Lab Data Materials, Substructure
Assessment of Extreme and Metocean Conditions in the Swedish Exclusive Economic Zone for Wave Energy Nilsson, E., Wrang, L., Rutgersson, A. Journal Article Wave
Robust mission planning for Autonomous Marine Vehicle fleets Thompson, F., Galeazzi, R. Journal Article Modeling
Antioxidant behaviors of graphene in marine environment: A first-principles simulation Yao, W., Zhou, S., Wang Z. Journal Article Materials
Operations and Maintenance Modelling of Floating Hybrid Systems Gray, A. Report Wave Hybrid Devices
O&M Models for Ocean Energy Converters: Calibrating through Real Sea Data Thomaz, T., Crooks, D., Medina-Lopez, E. Journal Article Wave Field Data, Modeling
Numerical design study of multipoint mooring systems for the floating wave energy converter in deep water with a sloping bottom Huang, S., Sheng, S., Gerthoffert, A. Journal Article Wave Modeling Mooring
Numerical models to predict the performance of tidal stream turbines working under off-design conditions Ordonez-Sanchez, S., Ellis, R., Porter, K. Journal Article Current, Tidal Modeling Hydrodynamics, Performance, Structural
Numerical study into horizontal tidal turbine wake velocity deficit: Quasi-steady state and transient approaches Leroux, T., Osbourne, N., Groulx, D. Journal Article Current, Axial Flow, Tidal Modeling Hydrodynamics
Physical and numerical study of the combined bearing capacity of hybrid foundation systems Cheng, N., Gaudin, C., Cassidy, M. Journal Article Lab Data, Modeling Substructure
Application of a multiple attribute group decision making (MAGDM) model for selecting appropriate maintenance strategy for marine and offshore machinery operations Asuquo, M., Wang, J., Zhang, L. Journal Article Modeling
Technical Requirements for the Assessment Design Tools Nava, V., Gonzalez, I., Mendia, J. Report Performance
Analysis of seismic behaviour of an offshore wind turbine with a flexible foundation Yang, Y., Bashir, M., Li, C. Journal Article Modeling Structural, Substructure
Mapping Exercise: A Comprehensive Summary Report - North Sea Solutions for Innovation in Corrosion for Energy Matteucci, F. Report Materials
Inter-and intra-annual variability of potential power production from wave energy converters Morim, J., Cartwright, N., Hemer, M. Journal Article Wave Field Data Array Effects, Performance
Offshore infrastructure planning using a vine copula approach for environmental conditions: an application for replacement maintenance of tidal energy infrastructure de Nie, R., Leontaris, G., Hoogendoorn, D. Journal Article Current, Tidal Modeling Materials
Bidirectional Long Short-Term Memory Networks for Rapid Fault Detection in Marine Hydrokinetic Turbines Wilson, D., Passmore, S., Tang, Y. Conference Paper Current, Wave Modeling
Marine renewable energy potential: A global perspective for offshore wind and wave exploitation Weiss, C., Guanche, R., Ondiviela, B. Journal Article Modeling Grid Integration, Performance
Effectively performing marine operations in strong current areas Dhome, D., Allo, J., Morandeau, M. Conference Paper Current
Learning Curves for Marine Operations in the Offshore Renewable Energy Sector Hudson, B., Kay, E., Lawless, M. Conference Paper Current, Tidal, Wave Modeling
Multivariate analysis of the reliability, availability, and maintainability characterizations of a Spar–Buoy wave energy converter farm Rinaldi, G., Portillo, J., Khalid, F. Journal Article Wave, Oscillating Water Column Performance
Deployment and Maintenance of Wave Energy Converters at the Lysekil Research Site: A Comparative Study on the Use of Divers and Remotely-Operated Vehicles Rémouit, F. , Chatzigiannakou, M. , Bender, A. Journal Article Wave Field Data
Towards an optimum design of wave energy converter arrays through an integrated approach of life cycle performance and operational capacity López-Ruiz, A., Bergillos, R., Raffo-Caballero, J. Journal Article Modeling Array Effects
A decision support model to optimise the operation and maintenance strategies of an offshore renewable energy farm Rinaldi, G., Thies, P., Walker, R. Journal Article Current, Tidal Modeling
CO2 saturated water as two-phase flow for fouling control in reverse electrodialysis Moreno, J., de Hart, N., Saakes, M. Journal Article Salinity Gradient Lab Data
Analytical and computational modelling for wave energy systems: the example of oscillating wave surge converters Dias, F., Renzi, E., Gallagher, S. Journal Article Wave, Oscillating Wave Surge Modeling Hydrodynamics
Offshore renewable energy systems: Solutions for reduction in operational costs Capocci, R., Dooly, G., Toal, D. Conference Paper Current, Wave
Ocean forecasting for wave energy production Mérigaud, A., Ramos, V., Paparella, F. Journal Article Wave Modeling
Monitoring the condition of Marine Renewable Energy Devices through underwater Acoustic Emissions: Case study of a Wave Energy Converter in Falmouth Bay, UK Walsh, J., Bashir, I., Garrett, J. Journal Article Wave Field Data Acoustics
Modelling Operations and Maintenance Strategies for Wave Energy Arrays Gray, A. Thesis Wave Modeling
Condition-based maintenance methods for marine renewable energy Mérigaud, A., Ringwood, J. Journal Article Current, Wave
Techno-Economic Related Metrics for aWave Energy Converters Feasibility Assessment de Andres, A., Maillet, J., Todalshaug, J. Journal Article Wave Modeling Array Effects
The marine electrical power industry with the use of renewable energy carriers. Part 2. Axial multipole synchronous generators with permanent magnets for wind and wave offshore power plants Khrisanov, V., Dmitriev, B. Journal Article Wave Hybrid Devices, Performance, Substructure
Hybrid wave and offshore wind farms: A comparative case study of co-located layouts Astariz, S., Pérez-Collazo, C., Abanades, J. Journal Article Wave Modeling Hybrid Devices, Hydrodynamics
Effects of turbulence on tidal turbines: Implications to performance, blade loads, and condition monitoring Blackmore, T. , Myers, L., Bahaj, A. Journal Article Current, Tidal Lab Data, Modeling, Scale Device Hydrodynamics, Structural
A Floating Ocean Energy Conversion Device and Numerical Study on Buoy Shape and Performance Song, R., Zhang, M., Qian, X. Journal Article Current, Wave Modeling Structural
Risk-based Operation and Maintenance Approach for Wave Energy Converters Taking Weather Forecast Uncertainties into Account Ambühl, S., Kramer, M., Sorenson, J. Conference Paper Wave Modeling
2D fluorescence spectroscopy for monitoring ion-exchange membrane based technologies – Reverse electrodialysis (RED) Pawlowski, S., Galinha, C., Crespo, J. Journal Article Salinity Gradient Lab Data
A global analysis of the operation and maintenance role on the placing of wave energy farms Guanche, R., de Andres, A., Losada, I. Journal Article Wave
Accessibility for operation and maintenance tasks in co-located wind and wave energy farms with non-uniformly distributed arrays Astariz, S., Iglesias, G. Journal Article Wave Modeling Hybrid Devices
TiPTORS Design for Reliability Tool: Phase 1 Specification ORE Catapult Report Current, Axial Flow, Tidal
TiPTORS Design for Reliability Methodology: Phase 1 Summary Report ORE Catapult Report Current, Axial Flow, Tidal
Fatigue reliability and calibration of fatigue design factors of wave energy converters Ambühl, S., Ferri, F., Kofoed, J. Journal Article Wave, Point Absorber Field Data, Modeling Control, Structural
Operation and maintenance strategies for wave energy converters Ambühl, S., Marquis, L., Kofoed, J. Journal Article Wave
Co-located wind-wave farm synergies (Operation & Maintenance): A case study Astariz, S., Pérez-Collazo, C., Abanades, J. Journal Article Wave Modeling Hybrid Devices
Reference Model 5: Oscillating Surge Wave Energy Converter Yu, Y., Jenne, D., Thresher, R. Report Wave, Oscillating Wave Surge Lab Data, Modeling Mooring, Performance, Structural
Reference Model 6 (RM6): Oscillating Wave Energy Converter Bull, D., Smith, C., Jenne, D. Report Wave, Oscillating Water Column Lab Data, Modeling, Scale Device Hydrodynamics, Performance, Structural
Best practice report–Operation and Maintenance Requirements Maisondieu, C., Johanning, L., Weller, S. Report Current, Tidal, Wave
Displaying 1 - 50 of 73 results