Abstract
Floating two-body wave energy converters (WECs) exhibit advantages, including insensitivity to water depth and tidal range, along with adaptability to multi-level sea states. However, WECs suffer from drawbacks, including unstable power generation and low wave energy capture efficiency. To enhance the hydrodynamic performance and energy capture efficiency, a dish-shaped buoy and perforated damping plate configuration was designed based on conventional two-body WECs. First, four two-body WECs were developed according to these configurations. Second, a numerical model based on potential flow theory and the boundary element method (BEM) was established, with its accuracy validated through sea trials. Finally, the frequency domain response, motion response, mooring tension and power absorption effect of the WECs under wave excitation of grades 3, 4 and 5 were analyzed. The results demonstrate that both the dish-shaped buoy and perforated damping plate significantly improve the device stability and energy capture potential. Regarding the motion response, both configurations reduced the peak response amplitudes in heave and roll, enhancing the device stability. For mooring tension, both configurations reduced the mooring line tension. For power absorption, the perforated damping plate effectively increased the energy capture efficiency, while the dish-shaped buoy also demonstrated superior performance under higher-energy wave conditions. Overall, this study provides a theoretical foundation and design guidance for floating two-body WECs.