Abstract
Wave power, along with renewable energy-generating sources like tides and streams, is underestimated considering its advantageous physical properties and predictability. This paper examines possible examples of wave power installations in the Baltic Sea and the Danish part of the North Sea. Hindcasting data is used allowing estimations of wave energy generated and results show promising areas in the North Sea, but also several parts of the Baltic Sea are of interest. The study is based upon linear generator technique, placed on the seabed using point-absorbers arranged in arrays of up to several thousand units. The study aims at showing the physical possibilities of wave energy, including economical feasibility and environmental advantages of wave energy even in moderate wave climates. With discussion from two examples in the Baltic Sea, one in the Danish North Sea and a new pilot study site in the Swedish part of Skagerrak, this study show feasible illustrations of wave energy takeouts. Project examples vary in size due to distance to grid, grid voltage, and may thus be economically feasible. Examples also show considerations in societal and nature conservation matters, including aspects such as industrial and military interests, archaeological or marine reserves and local geology. The authors conclude that wave energy electric conversion is an option that needs more attention and which has several advantages compared to conventional renewable sources. Sound engineering, in combination with producer, consumer and broad societal perspective is advised for a sustainable development of wave energy conversion.