Abstract
There are many archetypes of wave energy converters (WEC) that vary widely in operating principles, geometry, controls, number of bodies, and degrees of freedom (DOF). Fundamental WEC research often simplifies this complexity by reducing the number of floating bodies and restricting motions to the dominant degree of freedom. This paper presents the effects of increasing the number of bodies and degrees of freedom of a WEC on body response, power take-off controls, and power capture. The results are from physical experiments with a 1 meter diameter model of the open-source laboratory upgrade point absorber (LUPA). LUPA is a two-body point absorber WEC with a buoyancy-driven float and a reactionary spar with a large heave plate. It can be transformed between a one-body heave-only, two-body heave-only, and a two-body 6 DOF device without changing the geometries, controls, or mooring lines. Results show that adding a secondary submerged body to a point absorber causes power capture to decrease by up to 76% at longer periods. It is also demonstrated that constraining a two-body point absorber to heave motions can be a good power capture approximation for a six-DOF moored two-body point absorber with slight shifts in the resonant period. A discussion on the uncertainty of frequently used metrics in wave energy literature is included with a special focus on uncertainty in wave energy experimental testing.