Maintenance

Work done on a device after it is operational.

Maintenance activities, or work done on a device after it is operational, may involve cleaning the surface of a device, replacing device components, or refilling hydraulic fluids. Such work can typically be conducted by divers, underwater robots, or by temporarily removing the device from the water. However, device deployment in highly energetic offshore environments can make regular maintenance costly and challenging. Nevertheless, continued maintenance of marine renewable energy devices is especially important as varying operating speeds and loads, corrosion, and other structural stresses represent significant threats to device survivability and performance.

Photo: Sabella Balao

Affiliated Marine Energy Engineering Documents

Total results: 138
Title Author Date Type of Content Technology Collection Method Engineering
Exhaustive closed loop behavior of an one degree of freedom first-generation device for harnessing energy from marine currents del Horno, L., Segura, E., Morales, R. Journal Article Current, Tidal Lab Data, Modeling Structural
Environmental and Economic Impacts of Biofouling on Marine and Coastal Heat Exchangers Mathew, N., Kronholm, J., Bertilsson, K. Book Chapter OTEC Modeling Performance
An International Evaluation and Guidance Framework for Ocean Energy Technology Hodges, J., Henderson, J., Ruedy, L. Report Current, Tidal, Wave Control, Performance
Research on hydrodynamic characteristics of horizontal axis tidal turbine with rotation and pitching motion under free surface condition Wang, S., Li, C., Xie, Y. Journal Article Axial Flow Turbine, Tidal Modeling Grid Integration, Hydrodynamics, Materials, Performance
Design and Analysis of a Mooring System for a Wave Energy Converter Depalo, F., Wang, S., Xu, S. Journal Article Wave Field Data, Lab Data, Modeling, Test Center Materials, Mooring, Performance, Structural
A Decision Support Tool for Long-Term Planning of Marine Operations in Ocean Energy Projects Fonseca, F., Amaral, L., Chainho, P. Journal Article Current, Tidal, Wave
Increased reliability of tidal turbines thanks to a better knowledge of realistic tidal conditions, use of RAM analysis, advanced monitoring, maintenance strategies and intelligent design components. Le Diagon, V., Mayorga, P., Sukendro, M. Conference Paper Current, Tidal Modeling Control, Performance
Wave Farm Design: Simulation of Marine Operations for Improved Cost of Energy Henry, A., Giorgi, S., Kennedy, B. Conference Paper Wave Modeling
Aerodynamic characteristics of airfoils used in high tip-speed-ratio tidal rotors for less energetic flows Martinez, R., Encarnacion, J., Ordonez-Sanchez, S. Conference Paper Current, Tidal Lab Data, Modeling Performance, Structural
Numerical modelling of rock anchor uplift capacity for offshore applications Cerfontaine, B., Brown, M., Caton, A. Conference Paper Current, Wave Modeling Mooring, Substructure
Mooring types of point absorbing wave energy converters Chatzigiannakou, M., Temiz, I. Conference Paper Wave, Point Absorber Mooring
Failure and reliability growth in tidal stream turbine deployments Walker, S., Thies, P. Conference Paper Current, Tidal Performance
Sea Wave Energy. A Review of the Current Technologies and Perspectives Curto, D., Franzitta, V., Guercio, A. Journal Article Wave Performance
The rebirth and eco-friendly energy production of an artificial lake: A case study on the tidal power in South Korea Park, E., Lee, T. Journal Article Current, Tidal Lab Data, Modeling Structural
3D Numerical Study of the Impact of Macro-Roughnesses on a Tidal Turbine, on Its Performance and Hydrodynamic Wake Robin, I., Bennis, A., Dauvin, J. Journal Article Current, Tidal Modeling Performance
Wave Energy Technologies for Chile: Critical Analysis Tampier, G., Cifuentes, C., Parra, C. Report Wave
Impact of innovation in marine energy generation, distribution, or transmission-related technologies on carbon dioxide emissions in the United States Liguo, X., Ahmad, M., Khattak, S. Journal Article Current, Wave Performance
Establishing an Agenda for Biofouling Research for the Development of the Marine Renewable Energy Industry in Indonesia Iswadi, A., Porter, J., Bell, M. Journal Article Materials
The impact of biofilm on marine current turbine performance Farkas, A., Degiuli, N., Martic, I. Journal Article Current, Axial Flow Turbine Modeling Hydrodynamics, Materials, Performance
Materials & Manufacturing for Marnie Energy Technologies Report Hernandez-Sanchez, B. Report Materials, Structural
In-Situ Performance and Load Measurements for a Grid Connected Tidal Energy Conversion System Wosnik, M., O'Byrne, P., Bichanich, M. Presentation Current, Tidal Field Data Performance
Abrasion and Cavitation Erosion Resistance of Multi-Layer Dip Coated Sol-Gel Coatings on AA2024-T3 Hegde, M., Kavanagh, Y., Duffy, B. Journal Article Current, Wave, Salinity Gradient, OTEC Field Data Materials
Operations and maintenance optimisation for a 100 MW wave energy farm in Ireland Giorgi, S., Henry, A., Kennedy, B. Journal Article Wave, Point Absorber Modeling
Clean power generation from salinity gradient using reverse electrodialysis technologies: Recent advances, bottlenecks, and future direction Chae, S., Kim, H., Hong, J. Journal Article Salinity Gradient, Reverse Electrodialysis Lab Data, Modeling Performance
A Semantic Segmentation Method Based on Image Entropy Weighted Spatio-Temporal Fusion for Blade Attachment Recognition of Marine Current Turbines Qi, F., Wang, T. Journal Article Current, Ocean Current Lab Data Performance, Structural
A tool to select offshore renewable energy facilities. The case of study of shipyards and ports in Spain Fernandez-Leal, F., Castro-Santos, L., Rubial-Yanez, P. Journal Article Current, Wave
Resilience of wave energy farms using metocean dependent failure rates and repair operations Göteman, M., Shahroozi, Z., Stavropoulou, C. Journal Article Wave, Point Absorber Modeling Array Effects, Performance
Weather Window Analysis in Operations and Maintenance Policies for Offshore Floating Multi-Purpose Platforms Heo, T., Liu, D., Manuel, L. Journal Article Wave Modeling
Informing Early Design Decisions Through Functional Analysis of Maintenance Drivers Algarra, N., Dong, A. Conference Paper Wave Modeling
A Filtering device for improving the quality of cooling water in turbine generator of Sihwa Tidal Power Plant Kim, T., Kwak, H., Bang, J. Conference Paper Current, Tidal Lab Data
Lubrication of Offshore Mechanical Components: Towards Sustainable & Reliable Power Production Tamayo, J., Glavatskih, S. Conference Paper Current, Tidal, Wave Lab Data
Antifouling And Anticorrosive Prevention With Ceramic Coatings On Offshore Structures For Renewable Energy Sánchez, D., García, S., Ruiz, A. Conference Paper Current, Tidal, Wave Field Data Materials, Structural
Biofilm prevention in the generator of a direct drive wave energy converter Baker, N., Turkmen, S., Li, C. Conference Paper Wave Lab Data Performance
SEASNAKE: Impact - Marine operations modelling for evidence-based results detailing the impact of using a new fully dynamic cable design for ocean energy devices. Kennedy, B., Giorgi, S., Senar, A. Conference Paper Current, Wave Modeling Substructure
An International Evaluation and Guidance Framework for Ocean Energy Technology (2023) Hodges, J., Henderson, J., Ruedy, L. Report Current, Wave
Impacts of membrane fouling on nanofluidic salinity gradient energy conversion process Mao, R., Chen, X., Long, R. Journal Article Salinity Gradient, Reverse Electrodialysis Modeling Performance
A preliminary study of a novel wave energy converter of a Scotch Yoke mechanism-based power take-off Shami, E., Mayberry, L., Zhang, R. Journal Article Wave Lab Data, Modeling Performance
Synthesis of Silver Nanoparticle-Immobilized Antibacterial Anion-Exchange Membranes for Salinity Gradient Energy Production by Reverse Electrodialysis Eti, M., Cihanoğlu, A.,, Hamaloğlu, K. Journal Article Salinity Gradient, Reverse Electrodialysis Lab Data
Displaying 101 - 138 of 138 results